Sharp KB6524PS 24-Inch Microwave Drawer Oven, Stainless steel Reviews

Works great! I was concerned in fitting this in an IKEA cabinet but it fit perfectly in their 24" cabinet with a few modifications First The space where the cabinet attaches to the ikea rail system Is right where the power is supposed to be. As we already ran the power we had to move the attachment point lower by drilling some new holes for the bracker and just attached it to the wall off the rail (IKEA provides hardware attach off rail) if we caught this earlier we would of just used a recessed outlet and had the power moved elsewhere. The second modification was having to drill new peg holes for the shelf the microwave would sit on as the standard holes left us with a 3/4 gap at the top. Third the screws to attache the microwave barley do not line up with the edges of the cabinet so we had to add a 1/4 shim for the screws to bite into. Make sure to pre drill the holes. You can see hole close it is to working in the picture And lastly this microwave is 5" shorter then IKEAs so you will need a 15" bottom drawer (or 10" and 5" or 3 5" drawers) vs the IKEA standard 10". If you did the customer drill hole a 15" will 100% fit. As far as the microwave we love not having to bend down to use it. Having no carousel make what you can put in the microwave much larger then a standard microwave. The only complaint is motorized close/open can be a little slow at times.